Welcome!

Microsoft Cloud Authors: Janakiram MSV, Yeshim Deniz, David H Deans, Andreas Grabner, Stackify Blog

Related Topics: Containers Expo Blog, Microservices Expo, Microsoft Cloud, Machine Learning

Containers Expo Blog: Book Review

Developing Quality Technical Information: Third Edition

A Handbook for Writers and Editors

As an enterprise and software architect the one thing I hate most about my job is documentation, yet the importance of doing documentation on sizable projects is what I find myself preaching about the most.

One reason I understand the importance of documentation is that I came from an electronic engineering background. As an electronic engineer 93% - 97% of my time was consumed doing proof of concepts and documentation. Almost all of that time was documentation.

It was just my luck that my boss was an English grammar teacher before moving into engineering. My documents came back very bloody. He used a red pen to mark up my documents. It took me 2 years, and a whole lot of tongue biting, but I started getting papers through him without a red mark. I still remember the first one. I walked outside to where the smokers took their breaks and let out a screaming "YES, Finally!!!"

I have been without my grammar teaching boss for over 18 years now, and I am pretty sure if he came across the book reviews I am writing now, he would be sending me bloodied up copies!!! I really needed this book!!

Technical documentation is a hard skill set to learn, at least doing good technical documentation is. I have been on Template Zombie projects where teams considered documentation complete when they had filled in enough templates to overwhelm the customer to the point where they would not have time to review 1/10 of what was being written.

One project I was on built a documentation generator so it was easier to duplicate documents and only change the title and a few pieces of content. The sad part of that project was they got paid for each document handed in. The criteria for getting paid for use cases were that they had to have something underneath every heading in the document.

Documentation should not be something you check off of the project's task list, it should add value to the project or it should not be done. This book will definitely help you make valuable documentation. I have listed the chapters below to give you an idea of what the book covers.

Part 1: Introduction
Chapter 1. Technical information continues to evolve
Chapter 2. Developing quality technical information

Part 2: Easy to use
Chapter 3. Task orientation
Chapter 4. Accuracy
Chapter 5. Completeness

Part 3: Easy to understand
Chapter 6. Clarity
Chapter 7. Concreteness
Chapter 8. Style

Part 4: Easy to find
Chapter 9. Organization
Chapter 10. Retrievability
Chapter 11. Visual effectiveness

Part 5: Putting it all together
Chapter 12. Applying more than one quality characteristic
Chapter 13. Reviewing, testing, and evaluating technical information

Part 6: Appendixes
Appendix A. Quality checklist
Appendix B. Who checks which characteristics?
Glossary
Resources and references

When I came into the Dot Com Boom I found some software engineering, but most of what I found was the wild west and cowboy coding running rampant. The industry has not changed much since then. We just gave names to the chaotic processes to justify our lack of discipline. I continued my engineering practices and quickly learned how to document software processes and architectures, but convincing others to do it was a different story.

The only way I have been able to show it has value is do it myself. After the team sees I am willing to suffer the boredom of documentation they tend to step in and help. That wouldn't happen if we didn't make use of the documentation and they didn't see value in it.

It has been years since I have had someone to officially review it. This book really helps keep the important things in mind, and since there is no one else to review it, I can use all the help I can get. Right now one of the things I do to catch issues in my documents is have them spoken back to me using the speech capabilities on my computers. This helps me catch sentence structure issues, and some typos. It doesn't catch using the wrong their/there, insure/ensure, except/accept, and many more like sounding words that I mess up.

I use Sparx Enterprise Architect to document systems. Behind every diagram you find the information that explains them. If that information is not simple to understand, and easy to read, the diagram's value falls greatly.

Throughout the process you need to write for several different audiences. Your stakeholders are interested in different aspects of the system. Creating a clear view of what each type of stakeholder wants to see is a painful process, but it always pays off.

It makes me think about the solution from angles I normally wouldn't. Not only think about them, but diagram and describe them in a way that the solution's diagrams and associated documents can stand on their own. It makes me justify and clarify all the decisions made about the system, before it is in production!

Doing documentation is like coding. You start with a shell of what you are building, and you add the details to the different topics with each iteration of your development cycle. Your goal- to make simple, complete, accurate, logical, easy to understand documents. That is exactly what this book will guide you to do.

There are tons of examples showing the original text, diagram, or screen shot of a design, and then the revised version. There are two really cool appendices and a nice glossary. The first appendix is a huge checklist for quality characteristic. The second appendix is a big chart showing which roles should be reviewing the different aspects of the document.

Over all I found every chapter of this book valuable. As time goes on, the hardest part for me is keeping it all in mind. For that reason, this book will be staying by my side just like each of my current most useful programming books. If you do any documenting of software systems, this is a must read. Every software architect, enterprise architect, CIO, developer, tester, and project manager working on a software project, should have this book in his or her hands. You own to your stakeholders and yourself.


Developing Quality Technical Information: A Handbook for Writers and Editors (3rd Edition)

Developing Quality Technical Information: A Handbook for Writers and Editors (3rd Edition)

More Stories By Tad Anderson

Tad Anderson has been doing Software Architecture for 18 years and Enterprise Architecture for the past few.

@ThingsExpo Stories
SYS-CON Events announced today that Ryobi Systems will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Ryobi Systems Co., Ltd., as an information service company, specialized in business support for local governments and medical industry. We are challenging to achive the precision farming with AI. For more information, visit http:...
SYS-CON Events announced today that Keisoku Research Consultant Co. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Keisoku Research Consultant, Co. offers research and consulting in a wide range of civil engineering-related fields from information construction to preservation of cultural properties. For more information, vi...
SYS-CON Events announced today that B2Cloud will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. B2Cloud specializes in IoT devices for preventive and predictive maintenance in any kind of equipment retrieving data like Energy consumption, working time, temperature, humidity, pressure, etc.
SYS-CON Events announced today that N3N will exhibit at SYS-CON's @ThingsExpo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. N3N’s solutions increase the effectiveness of operations and control centers, increase the value of IoT investments, and facilitate real-time operational decision making. N3N enables operations teams with a four dimensional digital “big board” that consolidates real-time live video feeds alongside IoT sensor data a...
SYS-CON Events announced today that Mobile Create USA will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Mobile Create USA Inc. is an MVNO-based business model that uses portable communication devices and cellular-based infrastructure in the development, sales, operation and mobile communications systems incorporating GPS capabi...
SYS-CON Events announced today that Daiya Industry will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Daiya Industry specializes in orthotic support systems and assistive devices with pneumatic artificial muscles in order to contribute to an extended healthy life expectancy. For more information, please visit https://www.daiyak...
SYS-CON Events announced today that Interface Corporation will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Interface Corporation is a company developing, manufacturing and marketing high quality and wide variety of industrial computers and interface modules such as PCIs and PCI express. For more information, visit http://www.i...
In his session at @ThingsExpo, Greg Gorman is the Director, IoT Developer Ecosystem, Watson IoT, will provide a short tutorial on Node-RED, a Node.js-based programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. It provides a browser-based editor that makes it easy to wire together flows using a wide range of nodes in the palette that can be deployed to its runtime in a single-click. There is a large library of contributed nodes that help so...
Elon Musk is among the notable industry figures who worries about the power of AI to destroy rather than help society. Mark Zuckerberg, on the other hand, embraces all that is going on. AI is most powerful when deployed across the vast networks being built for Internets of Things in the manufacturing, transportation and logistics, retail, healthcare, government and other sectors. Is AI transforming IoT for the good or the bad? Do we need to worry about its potential destructive power? Or will we...
SYS-CON Events announced today that mruby Forum will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. mruby is the lightweight implementation of the Ruby language. We introduce mruby and the mruby IoT framework that enhances development productivity. For more information, visit http://forum.mruby.org/.
SYS-CON Events announced today that Suzuki Inc. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Suzuki Inc. is a semiconductor-related business, including sales of consuming parts, parts repair, and maintenance for semiconductor manufacturing machines, etc. It is also a health care business providing experimental research for...
SYS-CON Events announced today that Nihon Micron will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Nihon Micron Co., Ltd. strives for technological innovation to establish high-density, high-precision processing technology for providing printed circuit board and metal mount RFID tags used for communication devices. For more inf...
SYS-CON Events announced today that SIGMA Corporation will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. uLaser flow inspection device from the Japanese top share to Global Standard! Then, make the best use of data to flip to next page. For more information, visit http://www.sigma-k.co.jp/en/.
With major technology companies and startups seriously embracing Cloud strategies, now is the perfect time to attend 21st Cloud Expo October 31 - November 2, 2017, at the Santa Clara Convention Center, CA, and June 12-14, 2018, at the Javits Center in New York City, NY, and learn what is going on, contribute to the discussions, and ensure that your enterprise is on the right path to Digital Transformation.
SYS-CON Events announced today that MIRAI Inc. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. MIRAI Inc. are IT consultants from the public sector whose mission is to solve social issues by technology and innovation and to create a meaningful future for people.
While some developers care passionately about how data centers and clouds are architected, for most, it is only the end result that matters. To the majority of companies, technology exists to solve a business problem, and only delivers value when it is solving that problem. 2017 brings the mainstream adoption of containers for production workloads. In his session at 21st Cloud Expo, Ben McCormack, VP of Operations at Evernote, will discuss how data centers of the future will be managed, how th...
SYS-CON Events announced today that Enroute Lab will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Enroute Lab is an industrial design, research and development company of unmanned robotic vehicle system. For more information, please visit http://elab.co.jp/.
Agile has finally jumped the technology shark, expanding outside the software world. Enterprises are now increasingly adopting Agile practices across their organizations in order to successfully navigate the disruptive waters that threaten to drown them. In our quest for establishing change as a core competency in our organizations, this business-centric notion of Agile is an essential component of Agile Digital Transformation. In the years since the publication of the Agile Manifesto, the conn...
The Internet giants are fully embracing AI. All the services they offer to their customers are aimed at drawing a map of the world with the data they get. The AIs from these companies are used to build disruptive approaches that cannot be used by established enterprises, which are threatened by these disruptions. However, most leaders underestimate the effect this will have on their businesses. In his session at 21st Cloud Expo, Rene Buest, Director Market Research & Technology Evangelism at Ara...
WebRTC is great technology to build your own communication tools. It will be even more exciting experience it with advanced devices, such as a 360 Camera, 360 microphone, and a depth sensor camera. In his session at @ThingsExpo, Masashi Ganeko, a manager at INFOCOM Corporation, will introduce two experimental projects from his team and what they learned from them. "Shotoku Tamago" uses the robot audition software HARK to track speakers in 360 video of a remote party. "Virtual Teleport" uses a mu...