|By Don MacVittie||
|February 25, 2013 09:00 AM EST||
For those of you new to the Bare Metal Blog series, the entire list of posts can be found here.
This week F5 released the 2013 Performance report. This is an important report for the industry, because it is not marketing slideware. It is actual tests, performed on actual gear, with not only results, but configurations and test environment information also. By design, it is open – you can, assuming you have the proper gear, reproduce these tests exactly in your own environment, tweak the settings to reflect your local network, and run tests that have meaning explicitly for your organization.
The testing (and much of the writing) for this report was performed primarily by one of our very smart Product Management Engineers, Jeff Apple. His indefatigable efforts brought the test results forward in a way that we were able to craft it into the report, and his experience with previous performance reports added volumes of quality information to the written portion. While there were others involved, he is no doubt the lynchpin of this operation, and deserves credit here.
Or you can trust our amazingly smart engineers to have done a fair job at testing. I’ve been through the numbers a zillion times, asked questions where things seemed odd or out of place, put them together a bunch of different ways, and honestly, the results are solid. It would be easy for competitors to claim we weighted the testing in our own favor, except for two things. First off is the openness. You can look at the configuration files for the test equipment and for any piece of gear tested to see (assuming you know the device you’re looking at configs for) that our team really did go out of their way to show these ADCs in their best light. In one test, we even accepted less-than-optimal performance out of F5 gear in order to keep the test fair to all devices tested.
The test environment was actually customized slightly for each device to show it in the best possible light – if you’re familiar with Ixia gear, the SimUsers was tweaked to the best setting for the device in question. About the only bit you could nit-pick these test results on is that some devices were not licensed at their maximum (we do have to pay for them), but F5 gear was (we didn’t have to pay for them). But where it appeared software license limiting was the bottleneck factor in a test, we pointed it out.
I did help write the report, and honestly, it was very reminiscent of Network Computing Lab testing back when we were comparing products. Jeff did a great job of providing information, not spin. Fairness to the vendors, but with an interest in helping you determine what is best for your environment. Toward that end, some of our engineers even came up with a new way to look at the data that offers a far better picture than just a single test. More on that next week.
Some have asked me “Speeds and feeds, why should we care at this point?” and my answer is simple. It is not just speeds and feeds, it is network performance, particularly at the very intensive layer seven. Want to know if your chosen vendor has enough CPU cycles left to handle offloading encryption? This report will use test results to help give you an idea. Of course a report done elsewhere cannot tell you about your explicit environment, but with the large array of things we are asking ADCs to do, their ability to perform is increasingly critical to the performance of your overall web presence.
So take a peek, check out what your vendor and the competition are capable of. Figure out if you are getting what you need if you are just considering a purchase. Some of these limitations are pretty extreme compared to how a product is sold, so it’s worth knowing what you have or will be getting. This is a good place to point out too that some products actually outperformed their marketing numbers, which they were, and why we suppose they did so is discussed in the report, but it is always nice to see vendors promising the moon and delivering the stars.
It really isn’t all about speeds and feeds in the ADC market these days, but given this report, a list of add-on functionality available from your vendor, and a serious look at the impact adding required functionality may have on these baselines can help you understand your needs now and going forward.
UAS, drones or unmanned aircraft, no matter what you call them — this was their week. Our news stream was flooded with updates on the newly announced rules and regulations for commercial UAS from the FAA. So, naturally we have dedicated this week’s top news round up to highlight some of our favorite UAS stories.
Jun. 29, 2016 03:02 PM EDT Reads: 125
Internet of @ThingsExpo has announced today that Chris Matthieu has been named tech chair of Internet of @ThingsExpo 2016 Silicon Valley. The 6thInternet of @ThingsExpo will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 29, 2016 03:00 PM EDT Reads: 264
Basho Technologies has announced the latest release of Basho Riak TS, version 1.3. Riak TS is an enterprise-grade NoSQL database optimized for Internet of Things (IoT). The open source version enables developers to download the software for free and use it in production as well as make contributions to the code and develop applications around Riak TS. Enhancements to Riak TS make it quick, easy and cost-effective to spin up an instance to test new ideas and build IoT applications. In addition to...
Jun. 29, 2016 02:00 PM EDT Reads: 612
CenturyLink has announced that application server solutions from GENBAND are now available as part of CenturyLink’s Networx contracts. The General Services Administration (GSA)’s Networx program includes the largest telecommunications contract vehicles ever awarded by the federal government. CenturyLink recently secured an extension through spring 2020 of its offerings available to federal government agencies via GSA’s Networx Universal and Enterprise contracts. GENBAND’s EXPERiUS™ Application...
Jun. 29, 2016 02:00 PM EDT Reads: 300
In addition to all the benefits, IoT is also bringing new kind of customer experience challenges - cars that unlock themselves, thermostats turning houses into saunas and baby video monitors broadcasting over the internet. This list can only increase because while IoT services should be intuitive and simple to use, the delivery ecosystem is a myriad of potential problems as IoT explodes complexity. So finding a performance issue is like finding the proverbial needle in the haystack.
Jun. 29, 2016 01:15 PM EDT Reads: 279
"We work in the area of Big Data analytics and Big Data analytics is a very crowded space - you have Hadoop, ETL, warehousing, visualization and there's a lot of effort trying to get these tools to talk to each other," explained Mukund Deshpande, head of the Analytics practice at Accelerite, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jun. 29, 2016 12:37 PM EDT Reads: 281
When people aren’t talking about VMs and containers, they’re talking about serverless architecture. Serverless is about no maintenance. It means you are not worried about low-level infrastructural and operational details. An event-driven serverless platform is a great use case for IoT. In his session at @ThingsExpo, Animesh Singh, an STSM and Lead for IBM Cloud Platform and Infrastructure, will detail how to build a distributed serverless, polyglot, microservices framework using open source tec...
Jun. 29, 2016 12:30 PM EDT Reads: 533
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2016 Silicon Valley. The 19th Cloud Expo and 6th @ThingsExpo will take place on November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Interne...
Jun. 29, 2016 11:58 AM EDT Reads: 306
Presidio has received the 2015 EMC Partner Services Quality Award from EMC Corporation for achieving outstanding service excellence and customer satisfaction as measured by the EMC Partner Services Quality (PSQ) program. Presidio was also honored as the 2015 EMC Americas Marketing Excellence Partner of the Year and 2015 Mid-Market East Partner of the Year. The EMC PSQ program is a project-specific survey program designed for partners with Service Partner designations to solicit customer feedbac...
Jun. 29, 2016 11:00 AM EDT Reads: 565
Apixio Inc. has raised $19.3 million in Series D venture capital funding led by SSM Partners with participation from First Analysis, Bain Capital Ventures and Apixio’s largest angel investor. Apixio will dedicate the proceeds toward advancing and scaling products powered by its cognitive computing platform, further enabling insights for optimal patient care. The Series D funding comes as Apixio experiences strong momentum and increasing demand for its HCC Profiler solution, which mines unstruc...
Jun. 29, 2016 11:00 AM EDT Reads: 483
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
Jun. 29, 2016 11:00 AM EDT Reads: 431
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
Jun. 29, 2016 10:45 AM EDT Reads: 550
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jun. 29, 2016 10:30 AM EDT Reads: 477
In his general session at 18th Cloud Expo, Lee Atchison, Principal Cloud Architect and Advocate at New Relic, discussed cloud as a ‘better data center’ and how it adds new capacity (faster) and improves application availability (redundancy). The cloud is a ‘Dynamic Tool for Dynamic Apps’ and resource allocation is an integral part of your application architecture, so use only the resources you need and allocate /de-allocate resources on the fly.
Jun. 29, 2016 10:00 AM EDT Reads: 1,282
Connected devices and the industrial internet are growing exponentially every year with Cisco expecting 50 billion devices to be in operation by 2020. In this period of growth, location-based insights are becoming invaluable to many businesses as they adopt new connected technologies. Knowing when and where these devices connect from is critical for a number of scenarios in supply chain management, disaster management, emergency response, M2M, location marketing and more. In his session at @Th...
Jun. 29, 2016 09:45 AM EDT Reads: 1,243
Machine Learning helps make complex systems more efficient. By applying advanced Machine Learning techniques such as Cognitive Fingerprinting, wind project operators can utilize these tools to learn from collected data, detect regular patterns, and optimize their own operations. In his session at 18th Cloud Expo, Stuart Gillen, Director of Business Development at SparkCognition, discussed how research has demonstrated the value of Machine Learning in delivering next generation analytics to imp...
Jun. 29, 2016 09:45 AM EDT Reads: 921
The idea of comparing data in motion (at the sensor level) to data at rest (in a Big Data server warehouse) with predictive analytics in the cloud is very appealing to the industrial IoT sector. The problem Big Data vendors have, however, is access to that data in motion at the sensor location. In his session at @ThingsExpo, Scott Allen, CMO of FreeWave, discussed how as IoT is increasingly adopted by industrial markets, there is going to be an increased demand for sensor data from the outermos...
Jun. 29, 2016 09:25 AM EDT Reads: 254
In his keynote at 18th Cloud Expo, Andrew Keys, Co-Founder of ConsenSys Enterprise, provided an overview of the evolution of the Internet and the Database and the future of their combination – the Blockchain. Andrew Keys is Co-Founder of ConsenSys Enterprise. He comes to ConsenSys Enterprise with capital markets, technology and entrepreneurial experience. Previously, he worked for UBS investment bank in equities analysis. Later, he was responsible for the creation and distribution of life sett...
Jun. 29, 2016 09:15 AM EDT Reads: 1,437
IoT is rapidly changing the way enterprises are using data to improve business decision-making. In order to derive business value, organizations must unlock insights from the data gathered and then act on these. In their session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, and Peter Shashkin, Head of Development Department at EastBanc Technologies, discussed how one organization leveraged IoT, cloud technology and data analysis to improve customer experiences and effi...
Jun. 29, 2016 09:15 AM EDT Reads: 493
There are several IoTs: the Industrial Internet, Consumer Wearables, Wearables and Healthcare, Supply Chains, and the movement toward Smart Grids, Cities, Regions, and Nations. There are competing communications standards every step of the way, a bewildering array of sensors and devices, and an entire world of competing data analytics platforms. To some this appears to be chaos. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, Bradley Holt, Developer Advocate a...
Jun. 29, 2016 08:45 AM EDT Reads: 945