|By Business Wire||
|January 6, 2013 07:00 PM EST||
The USB 3.0 Promoter Group today announced development of a SuperSpeed USB (USB 3.0) enhancement that will add a much higher data rate, delivering up to twice the data through-put performance of existing SuperSpeed USB over enhanced, fully backward compatible USB connectors and cables. This supplement to the USB 3.0 specification is anticipated to be completed by the middle of this year.
Key characteristics of the higher-rate SuperSpeed USB solution include:
- New 10 Gbps USB data rate
- Compatibility with existing cables and connectors
- Improved data encoding for more efficient data transfer leading to higher through-put and improved I/O power efficiency
- Compatible with existing USB 3.0 software stacks and device class protocols
- Compatible with both existing 5 Gbps and new 10 Gbps USB 3.0 hubs and devices, as well as USB 2.0 products
“With USB technology continuing to be the data and power delivery path of choice across personal computing and consumer electronics, we are always looking ahead to how to best improve user experience and connectivity performance,” said Brad Saunders, USB 3.0 Promoter Group Chairman. “Doubling SuperSpeed USB performance will be especially beneficial for emerging USB docking and storage applications.”
“For our customers, 10 Gbps USB represents an important evolution in this ubiquitous I/O standard,” said Mark VandenBrink, Vice President and Chief Technology Officer, PC Global Business Unit, HP. “By doubling the bandwidth while maintaining full backwards compatibility with the broad ecosystem of USB peripherals and software, we will be able to better meet the needs of our customers with this high-speed technology.”
“We recognize that more mainstream client computing applications are going to need higher through-put to user-connected peripherals and devices,” said Alex Peleg, Vice President, Intel Architecture Group. “Intel is fully committed to delivering 10 Gbps USB performance to these platforms while retaining compatibility with the existing USB ecosystem to help to satisfy user demand for low-cost, higher-performance solutions.”
“Microsoft has been a strong supporter of the USB community where we have advocated balancing innovation and compatibility. The planned updates to USB 3.0 are consistent with our views," said Dennis Flanagan, General Manager, Windows Ecosystem Engagement. "These updates will enable higher data rates and allow combining of disk, high-definition audio/video and networking traffic on a single cable — all while maintaining compatibility with billions of existing devices.”
“This enhancement builds on the tremendous success of USB and expands its capability by doubling the data rate,” said Roland Sperlich, TI Consumer and Computing Interface Product Line Manager. “While maintaining backward compatibility, the 10 Gbps data rate allows users to do more with a universal standard that can be leveraged by many industries.”
The 10 Gbps SuperSpeed USB update is targeted for industry review during the first quarter of this year. Further information regarding the specification and plans for pre-release industry reviews will be provided via the USB Implementers Forum (USB-IF) website at http://www.usb.org/developers/USB-Futures.pdf.
About the USB 3.0 Promoter Group
The USB 3.0 Promoter Group, comprised of Hewlett-Packard Company, Intel Corporation, Microsoft, Renesas Electronics, ST-Ericsson and Texas Instruments, developed the USB 3.0 Specification that was released in November 2008. In addition to maintaining and enhancing this specification, the USB 3.0 Promoter Group develops specification addendums to extend or adapt its specifications to support more platform types or use cases where adopting USB 3.0 technology will be beneficial in delivering a more ubiquitous, richer user experience.
About the USB-IF
The non-profit USB Implementers Forum, Inc. was formed to provide a support organization and forum for the advancement and adoption of USB technology. The USB-IF facilitates the development of high-quality compatible USB devices through its logo and compliance program, and promotes the benefits of USB and the quality of products that have passed compliance testing. Further information, including postings of the most recent product and technology announcements, is available by visiting the USB-IF website at www.usb.org.
The increasing popularity of the Internet of Things necessitates that our physical and cognitive relationship with wearable technology will change rapidly in the near future. This advent means logging has become a thing of the past. Before, it was on us to track our own data, but now that data is automatically available. What does this mean for mHealth and the "connected" body? In her session at @ThingsExpo, Lisa Calkins, CEO and co-founder of Amadeus Consulting, will discuss the impact of wea...
May. 4, 2016 03:00 PM EDT Reads: 1,150
SYS-CON Events announced today that Ericsson has been named “Gold Sponsor” of SYS-CON's @ThingsExpo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. Ericsson is a world leader in the rapidly changing environment of communications technology – providing equipment, software and services to enable transformation through mobility. Some 40 percent of global mobile traffic runs through networks we have supplied. More than 1 billion subscribers around the world re...
May. 4, 2016 01:45 PM EDT Reads: 1,324
SYS-CON Events announced today that Peak 10, Inc., a national IT infrastructure and cloud services provider, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Peak 10 provides reliable, tailored data center and network services, cloud and managed services. Its solutions are designed to scale and adapt to customers’ changing business needs, enabling them to lower costs, improve performance and focus inter...
May. 4, 2016 01:00 PM EDT Reads: 1,420
The demand for organizations to expand their infrastructure to multiple IT environments like the cloud, on-premise, mobile, bring your own device (BYOD) and the Internet of Things (IoT) continues to grow. As this hybrid infrastructure increases, the challenge to monitor the security of these systems increases in volume and complexity. In his session at 18th Cloud Expo, Stephen Coty, Chief Security Evangelist at Alert Logic, will show how properly configured and managed security architecture can...
May. 4, 2016 12:47 PM EDT Reads: 262
We're entering the post-smartphone era, where wearable gadgets from watches and fitness bands to glasses and health aids will power the next technological revolution. With mass adoption of wearable devices comes a new data ecosystem that must be protected. Wearables open new pathways that facilitate the tracking, sharing and storing of consumers’ personal health, location and daily activity data. Consumers have some idea of the data these devices capture, but most don’t realize how revealing and...
May. 4, 2016 12:45 PM EDT Reads: 580
In his session at @ThingsExpo, Chris Klein, CEO and Co-founder of Rachio, will discuss next generation communities that are using IoT to create more sustainable, intelligent communities. One example is Sterling Ranch, a 10,000 home development that – with the help of Siemens – will integrate IoT technology into the community to provide residents with energy and water savings as well as intelligent security. Everything from stop lights to sprinkler systems to building infrastructures will run ef...
May. 4, 2016 12:45 PM EDT Reads: 1,252
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
May. 4, 2016 12:45 PM EDT Reads: 897
A critical component of any IoT project is the back-end systems that capture data from remote IoT devices and structure it in a way to answer useful questions. Traditional data warehouse and analytical systems are mature technologies that can be used to handle large data sets, but they are not well suited to many IoT-scale products and the need for real-time insights. At Fuze, we have developed a backend platform as part of our mobility-oriented cloud service that uses Big Data-based approache...
May. 4, 2016 12:15 PM EDT Reads: 580
trust and privacy in their ecosystem. Assurance and protection of device identity, secure data encryption and authentication are the key security challenges organizations are trying to address when integrating IoT devices. This holds true for IoT applications in a wide range of industries, for example, healthcare, consumer devices, and manufacturing. In his session at @ThingsExpo, Lancen LaChance, vice president of product management, IoT solutions at GlobalSign, will teach IoT developers how t...
May. 4, 2016 12:15 PM EDT Reads: 521
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
May. 4, 2016 12:15 PM EDT Reads: 1,335
There is an ever-growing explosion of new devices that are connected to the Internet using “cloud” solutions. This rapid growth is creating a massive new demand for efficient access to data. And it’s not just about connecting to that data anymore. This new demand is bringing new issues and challenges and it is important for companies to scale for the coming growth. And with that scaling comes the need for greater security, gathering and data analysis, storage, connectivity and, of course, the...
May. 4, 2016 11:15 AM EDT Reads: 1,231
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
May. 4, 2016 11:00 AM EDT Reads: 1,297
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
May. 4, 2016 11:00 AM EDT Reads: 1,380
So, you bought into the current machine learning craze and went on to collect millions/billions of records from this promising new data source. Now, what do you do with them? Too often, the abundance of data quickly turns into an abundance of problems. How do you extract that "magic essence" from your data without falling into the common pitfalls? In her session at @ThingsExpo, Natalia Ponomareva, Software Engineer at Google, will provide tips on how to be successful in large scale machine lear...
May. 4, 2016 10:00 AM EDT Reads: 1,515
Digital payments using wearable devices such as smart watches, fitness trackers, and payment wristbands are an increasing area of focus for industry participants, and consumer acceptance from early trials and deployments has encouraged some of the biggest names in technology and banking to continue their push to drive growth in this nascent market. Wearable payment systems may utilize near field communication (NFC), radio frequency identification (RFID), or quick response (QR) codes and barcodes...
May. 4, 2016 08:15 AM EDT Reads: 1,004
The IETF draft standard for M2M certificates is a security solution specifically designed for the demanding needs of IoT/M2M applications. In his session at @ThingsExpo, Brian Romansky, VP of Strategic Technology at TrustPoint Innovation, will explain how M2M certificates can efficiently enable confidentiality, integrity, and authenticity on highly constrained devices.
May. 4, 2016 08:00 AM EDT Reads: 1,266
You think you know what’s in your data. But do you? Most organizations are now aware of the business intelligence represented by their data. Data science stands to take this to a level you never thought of – literally. The techniques of data science, when used with the capabilities of Big Data technologies, can make connections you had not yet imagined, helping you discover new insights and ask new questions of your data. In his session at @ThingsExpo, Sarbjit Sarkaria, data science team lead ...
May. 4, 2016 08:00 AM EDT Reads: 1,191
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, will discuss how leveraging the Industrial Interne...
May. 4, 2016 04:45 AM EDT Reads: 1,359
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
May. 3, 2016 12:30 PM EDT Reads: 1,232
You deployed your app with the Bluemix PaaS and it's gaining some serious traction, so it's time to make some tweaks. Did you design your application in a way that it can scale in the cloud? Were you even thinking about the cloud when you built the app? If not, chances are your app is going to break. Check out this webcast to learn various techniques for designing applications that will scale successfully in Bluemix, for the confidence you need to take your apps to the next level and beyond.
May. 3, 2016 12:15 PM EDT Reads: 1,616