|By Eric Burgener||
|November 26, 2012 07:45 AM EST||
Legacy storage architectures do not perform very efficiently in virtual computing environments. The very random, very write-intensive I/O patterns generated by virtual hosts drive storage costs up as enterprises either add spindles or look to newer storage technologies like solid state disk (SSD) to address the IOPS shortfall.
SSD costs are coming down, but they are still significantly higher than spinning disk costs. When enterprises do consider SSD, how it is used and where it is placed in the virtual infrastructure can make a big difference in how much enterprises have to spend to meet their performance requirements. It can also impose certain operational limitations that may or may not be issues in specific environments.
Some of the key considerations that need to be taken into account are SSD placement (in the host or in the SAN), high availability/failover requirements, caching vs logging architectures, and the value of preserving existing investments vs rip and replace investments that promise storage hardware specifically designed for virtual environments.
There are two basic locations to place SSD, each of which offers its own pros and cons. Host-based SSD will generally offer the lowest storage latencies, particularly if the SSD is located on PCIe cards. In non-clustered environments where it is clear that IOPS and storage latencies are the key performance problems, these types of devices can be very valuable. In most cases, they will remove storage as the performance problem.
But don't necessarily expect that in your environment, these devices will deliver their rated IOPS directly to your applications. In removing storage as the bottleneck, system performance will now be determined by whatever the next bottleneck in the system is. That could be CPU, memory, operating system, or any number of other potential issues. This phenomenon is referred to as Amdahl's Law.
What you probably care about are application IOPS. Test the devices you're considering in your environment before purchase, so you know exactly the level of performance gain they will provide to you. Then you can make a more informed decision about whether or not you can cost justify them for use with your workloads. Paying for performance you can't use is like buying a Ferrari for use on America's interstate system - you may never get out of second gear.
Raw SSD technology generally can provide blazingly fast read performance. Write performance, however, varies depending on whether you are writing randomly or sequentially. The raw technical specs on many SSD devices indicate that sequential write performance may be half that of read performance, and random write performance may be half again as slow. Write latencies may also not be deterministic because of how SSD devices manage the space they are writing to. Many SSD vendors are combining software and other infrastructure around their SSD devices to address some of these issues. If you're looking at SSD, look to the software it's packaged with to make sure the SSD capacity you're buying can be used most efficiently.
Host-based SSD introduces failover limitations. If you have implemented a product like VMware HA in your environment to automatically recover failed nodes, any data sitting in a host-based SSD device that has not been written through to shared storage will not be available on recovery. This can lead to data loss on recovery - something that may or may not be an issue in your environment. Even though SSD is non-volatile storage, if the node it is sitting in is down, you can't get to it. You can get to it after that node is recovered, but the issue here is whether or not you can automatically fail over and have access to it.
Because of this issue, most host-based SSD products implement what is called a "write-through" cache, which means that they don't acknowledge writes at SSD latencies, they actually write them through to shared disk and then send the write acknowledgement back from there. Anything on shared disk can be potentially recovered by any other node in the cluster, ensuring that no committed data is unavailable on failover. But what this means is that you won't get any write performance improvements from SSD, just better read performance.
What does your workload look like in terms of read vs write percentages? Most virtual environments are very write intensive, much more so than they ever were in physical environments, and virtual desktop infrastructure (VDI) environments can be as much as 90% writes when operating in steady state mode. If write performance is your problem, host-based SSD with a write-through cache may not help very much in the big picture.
SAN-based SSD, on the other hand, can support failover without data loss, and if implemented with a write-back cache can provide write performance speedups as well. But many implementations available for use with SAN arrays are really only designed to speed up reads. Check carefully as you consider SSD to understand how it is implemented, and how well that maps to the actual performance requirements in your environment.
Caching vs Logging Architectures
Most SSD, wherever it is implemented, is used as a cache. Sizing guidelines for caches start with the cache as a percentage of the back-end storage it is front-ending. Generally the cache needs to be somewhere between 3% to 6% of the back-end storage, so larger data store capacities require larger caches. For example, 20TB of back-end data might require 1TB of SSD cache (5%).
Caches are generally just speeding up reads, but if you are working with a write-back cache, then the cache will have to be split between SSD capacity used to speed up reads and SSD capacity used to speed up writes. Everything else being equal in terms of performance requirements, write-back caches will have to be larger than write-through caches, but will provide more balanced performance gains (across both reads and writes).
Logging architectures, by definition, speed up writes, making them a good fit for write-intensive workloads like those found in virtual computing environments. Logs provide write performance gains by taking the very random workload and essentially removing the randomness from it by writing it sequentially to a log, acknowledging the writes from there, then asynchronously de-staging them to a shared storage pool. This means that the same SSD device used in a log vs used in a cache will be faster, assuming some randomness to the workload. The write performance the guest VMs see is the performance of the log device operating in sequential write mode almost all the time, and it can result in write performance improvements of up to 10x (relative to that same device operating in the random mode it would normally be operating in). And a log provides write performance improvements for all writes from all VMs all the time. (What's also interesting is that if you are getting 10x the IOPS from your current spinning disk, given Amdahl's Law, you may not even need to purchase SSD to remove storage as the performance bottleneck.)
Logs are very small (10GB or so) and are dedicated to a host, while the shared storage pool is accessible to all nodes in a cluster and primarily handles read requests. In a 20 node cluster with 20TB of shared data, you would need 200GB for the logs (10GB x 20 hosts) vs the 1TB you would need if SSD was used as a cache. Logs are much more efficient than caches for write performance improvements, resulting in lower costs.
If logs are located on SAN-based SSD, you not only get the write performance improvements, but this design fully supports node failover without data loss, a very nice differentiator from write-through cache implementations.
But what about read performance? This is where caches excel, and a write log doesn't seem to address that. That's true, and why it's important to combine a logging architecture with storage tiering. Any SSD capacity not used by the logs can be configured into a fast tier 0, which will provide the read performance improvements for any data residing in that tier. The bottom line here is that you can get better overall storage performance improvements from a "log + tiering" design than you can from a cache design while using 50% - 90% less high performance device (in this case, SSD) capacity. In our example above, if you buy a 256GB SAN-based SSD device and use it in a 20 node cluster, you'll get SSD sequential write performance for every write all the time, and have 56GB left over to put into a tier 0. Compare that to buying 1TB+ of cache capacity at SSD prices.
With single image management technology like linked clones or other similar implementations, you can lock your VM templates into this tier, and very efficiently gain read performance improvements against the shared blocks in those templates for all child VMs all the time. Single image management technology can help make the use of SSD capacity more efficient in either a cache or a log architecture, so don't overlook it as long as it is implemented in a way that does not impinge upon your storage performance.
Purpose-Built Storage Hardware
There are some interesting new array designs that leverage SSD, sometimes in combination with some of the other technologies mentioned above (log architectures, storage tiering, single image manage-ment, spinning disk). Designed specifically with the storage performance issues in virtual environments in mind, there is no doubt that these arrays can outperform legacy arrays. But for most enterprises, that may not be the operative question.
It's rare that an enterprise doesn't already have a sizable investment in storage. Many of these existing arrays support SSD, which can be deployed in a SAN-based cache or fast tier. It's much easier, and potentially much less disruptive and expensive if existing storage investments could be leveraged to address the storage performance issues in virtual environments. It's also less risky, since most of the hot new "virtual computing-aware" arrays and appliances are built by startups, not proven vendors. If there are pure software-based options to consider that support heterogeneous storage hardware and can address the storage issues common in virtual computing environments, allowing you to potentially take advantage of SSD capacity that fits into your current arrays, this could be a simpler, more cost-effective, and less risky option than buying from a storage startup. But only, of course, if it adequately resolves your performance problem.
If there's one point you should take away from this article, it's that just blindly throwing SSD at a storage performance problem in virtual computing environments is not going to be a very efficient or cost-effective way to address your particular issues. Consider how much more performance you need, whether you need it on reads, writes, or both, whether you need to failover without data loss, and whether preserving existing storage hardware investments is important to you. SSD is a great technology, but your best value from it will come when you deploy it most efficiently.
The 4th International Internet of @ThingsExpo, co-located with the 17th International Cloud Expo - to be held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA - announces that its Call for Papers is open. The Internet of Things (IoT) is the biggest idea since the creation of the Worldwide Web more than 20 years ago.
May. 25, 2015 09:00 AM EDT Reads: 1,430
The worldwide cellular network will be the backbone of the future IoT, and the telecom industry is clamoring to get on board as more than just a data pipe. In his session at @ThingsExpo, Evan McGee, CTO of Ring Plus, Inc., discussed what service operators can offer that would benefit IoT entrepreneurs, inventors, and consumers. Evan McGee is the CTO of RingPlus, a leading innovative U.S. MVNO and wireless enabler. His focus is on combining web technologies with traditional telecom to create a new breed of unified communication that is easily accessible to the general consumer. With over a de...
May. 25, 2015 06:00 AM EDT Reads: 4,614
Disruptive macro trends in technology are impacting and dramatically changing the "art of the possible" relative to supply chain management practices through the innovative use of IoT, cloud, machine learning and Big Data to enable connected ecosystems of engagement. Enterprise informatics can now move beyond point solutions that merely monitor the past and implement integrated enterprise fabrics that enable end-to-end supply chain visibility to improve customer service delivery and optimize supplier management. Learn about enterprise architecture strategies for designing connected systems tha...
May. 25, 2015 05:00 AM EDT Reads: 5,803
Cloud is not a commodity. And no matter what you call it, computing doesn’t come out of the sky. It comes from physical hardware inside brick and mortar facilities connected by hundreds of miles of networking cable. And no two clouds are built the same way. SoftLayer gives you the highest performing cloud infrastructure available. One platform that takes data centers around the world that are full of the widest range of cloud computing options, and then integrates and automates everything. Join SoftLayer on June 9 at 16th Cloud Expo to learn about IBM Cloud's SoftLayer platform, explore se...
May. 25, 2015 04:45 AM EDT Reads: 3,020
SYS-CON Media announced today that 9 out of 10 " most read" DevOps articles are published by @DevOpsSummit Blog. Launched in October 2014, @DevOpsSummit Blog offers top articles, news stories, and blog posts from the world's well-known experts and guarantees better exposure for its authors than any other publication. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to wait for long development cycles that produce softw...
May. 25, 2015 04:15 AM EDT Reads: 3,984
With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo in Silicon Valley. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be! Internet of @ThingsExpo, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 17th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The Internet of Things (IoT) is the most profound change in personal an...
May. 25, 2015 04:00 AM EDT Reads: 2,374
15th Cloud Expo, which took place Nov. 4-6, 2014, at the Santa Clara Convention Center in Santa Clara, CA, expanded the conference content of @ThingsExpo, Big Data Expo, and DevOps Summit to include two developer events. IBM held a Bluemix Developer Playground on November 5 and ElasticBox held a Hackathon on November 6. Both events took place on the expo floor. The Bluemix Developer Playground, for developers of all levels, highlighted the ease of use of Bluemix, its services and functionality and provide short-term introductory projects that developers can complete between sessions.
May. 25, 2015 04:00 AM EDT Reads: 6,122
From telemedicine to smart cars, digital homes and industrial monitoring, the explosive growth of IoT has created exciting new business opportunities for real time calls and messaging. In his session at @ThingsExpo, Ivelin Ivanov, CEO and Co-Founder of Telestax, shared some of the new revenue sources that IoT created for Restcomm – the open source telephony platform from Telestax. Ivelin Ivanov is a technology entrepreneur who founded Mobicents, an Open Source VoIP Platform, to help create, deploy, and manage applications integrating voice, video and data. He is the co-founder of TeleStax, a...
May. 25, 2015 04:00 AM EDT Reads: 6,255
The Internet of Things (IoT) promises to evolve the way the world does business; however, understanding how to apply it to your company can be a mystery. Most people struggle with understanding the potential business uses or tend to get caught up in the technology, resulting in solutions that fail to meet even minimum business goals. In his session at @ThingsExpo, Jesse Shiah, CEO / President / Co-Founder of AgilePoint Inc., showed what is needed to leverage the IoT to transform your business. He discussed opportunities and challenges ahead for the IoT from a market and technical point of vie...
May. 25, 2015 04:00 AM EDT Reads: 6,603
Grow your business with enterprise wearable apps using SAP Platforms and Google Glass. SAP and Google just launched the SAP and Google Glass Challenge, an opportunity for you to innovate and develop the best Enterprise Wearable App using SAP Platforms and Google Glass and gain valuable market exposure. In his session at @ThingsExpo, Brian McPhail, Senior Director of Business Development, ISVs & Digital Commerce at SAP, outlined the timeline of the SAP Google Glass Challenge and the opportunity for developers, start-ups, and companies of all sizes to engage with SAP today.
May. 25, 2015 03:00 AM EDT Reads: 4,897
The 3rd International @ThingsExpo, co-located with the 16th International Cloud Expo – to be held June 9-11, 2015, at the Javits Center in New York City, NY – is now accepting Hackathon proposals. Hackathon sponsorship benefits include general brand exposure and increasing engagement with the developer ecosystem. At Cloud Expo 2014 Silicon Valley, IBM held the Bluemix Developer Playground on November 5 and ElasticBox held the DevOps Hackathon on November 6. Both events took place on the expo floor. The Bluemix Developer Playground, for developers of all levels, highlighted the ease of use of...
May. 25, 2015 03:00 AM EDT Reads: 3,316
Enthusiasm for the Internet of Things has reached an all-time high. In 2013 alone, venture capitalists spent more than $1 billion dollars investing in the IoT space. With "smart" appliances and devices, IoT covers wearable smart devices, cloud services to hardware companies. Nest, a Google company, detects temperatures inside homes and automatically adjusts it by tracking its user's habit. These technologies are quickly developing and with it come challenges such as bridging infrastructure gaps, abiding by privacy concerns and making the concept a reality. These challenges can't be addressed w...
May. 25, 2015 02:45 AM EDT Reads: 6,556
The industrial software market has treated data with the mentality of “collect everything now, worry about how to use it later.” We now find ourselves buried in data, with the pervasive connectivity of the (Industrial) Internet of Things only piling on more numbers. There’s too much data and not enough information. In his session at @ThingsExpo, Bob Gates, Global Marketing Director, GE’s Intelligent Platforms business, to discuss how realizing the power of IoT, software developers are now focused on understanding how industrial data can create intelligence for industrial operations. Imagine ...
May. 25, 2015 02:00 AM EDT Reads: 5,012
SYS-CON Events announced today that Liaison Technologies, a leading provider of data management and integration cloud services and solutions, has been named "Silver Sponsor" of SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York, NY. Liaison Technologies is a recognized market leader in providing cloud-enabled data integration and data management solutions to break down complex information barriers, enabling enterprises to make smarter decisions, faster.
May. 25, 2015 01:30 AM EDT Reads: 5,136
The 17th International Cloud Expo has announced that its Call for Papers is open. 17th International Cloud Expo, to be held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, brings together Cloud Computing, APM, APIs, Microservices, Security, Big Data, Internet of Things, DevOps and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportunity. Submit your speaking proposal today!
May. 25, 2015 01:15 AM EDT Reads: 4,095
Hadoop as a Service (as offered by handful of niche vendors now) is a cloud computing solution that makes medium and large-scale data processing accessible, easy, fast and inexpensive. In his session at Big Data Expo, Kumar Ramamurthy, Vice President and Chief Technologist, EIM & Big Data, at Virtusa, will discuss how this is achieved by eliminating the operational challenges of running Hadoop, so one can focus on business growth. The fragmented Hadoop distribution world and various PaaS solutions that provide a Hadoop flavor either make choices for customers very flexible in the name of opti...
May. 25, 2015 12:30 AM EDT Reads: 3,563
Cultural, regulatory, environmental, political and economic (CREPE) conditions over the past decade are creating cross-industry solution spaces that require processes and technologies from both the Internet of Things (IoT), and Data Management and Analytics (DMA). These solution spaces are evolving into Sensor Analytics Ecosystems (SAE) that represent significant new opportunities for organizations of all types. Public Utilities throughout the world, providing electricity, natural gas and water, are pursuing SmartGrid initiatives that represent one of the more mature examples of SAE. We have s...
May. 24, 2015 11:00 PM EDT Reads: 5,899
The Internet of Things will put IT to its ultimate test by creating infinite new opportunities to digitize products and services, generate and analyze new data to improve customer satisfaction, and discover new ways to gain a competitive advantage across nearly every industry. In order to help corporate business units to capitalize on the rapidly evolving IoT opportunities, IT must stand up to a new set of challenges. In his session at @ThingsExpo, Jeff Kaplan, Managing Director of THINKstrategies, will examine why IT must finally fulfill its role in support of its SBUs or face a new round of...
May. 24, 2015 10:00 PM EDT Reads: 5,276
One of the biggest challenges when developing connected devices is identifying user value and delivering it through successful user experiences. In his session at Internet of @ThingsExpo, Mike Kuniavsky, Principal Scientist, Innovation Services at PARC, described an IoT-specific approach to user experience design that combines approaches from interaction design, industrial design and service design to create experiences that go beyond simple connected gadgets to create lasting, multi-device experiences grounded in people's real needs and desires.
May. 24, 2015 09:00 PM EDT Reads: 5,890
Wearable devices have come of age. The primary applications of wearables so far have been "the Quantified Self" or the tracking of one's fitness and health status. We propose the evolution of wearables into social and emotional communication devices. Our BE(tm) sensor uses light to visualize the skin conductance response. Our sensors are very inexpensive and can be massively distributed to audiences or groups of any size, in order to gauge reactions to performances, video, or any kind of presentation. In her session at @ThingsExpo, Jocelyn Scheirer, CEO & Founder of Bionolux, will discuss ho...
May. 24, 2015 09:00 PM EDT Reads: 4,991