|By Don MacVittie||
|November 26, 2012 08:00 AM EST||
I was talking with the team working on our yard – they’re putting in new sidewalks and a patio, amongst other things – and we got on the subject of gutters. When we bought this house, it came with no gutters, and that has, over time, caused some serious damage to the base of the house. Wood and plaster do not take it well when water pours down on them at the rate that, oh, say melting snow in the spring sends it down. So I had them get us an estimate for gutters on the entire house. Some of the work they’re estimating is running the gutters right to the storm drain, which is not normally cheap, but they had both the front and back yards all ripped up, so it is a good time to do it, both cheaper and less messy, since the mess is already there.
So I told them to do it, because I don’t want the sod they’re going to lay to be ripped up in a year when we decide to put the gutters on, and certainly don’t want them to rip up the patio and sidewalks they’re putting in now just to lay pipe later – that would be nearly impossible.
And that, in a nutshell, is the same reason why FPGAs are used in a lot of high-tech firms. If the device is my yard/sidewalks, and I have to choose between a custom ASIC versus an FPGA, the custom ASIC would require me to rip up the yard later, while the FPGA is planning ahead for change.
Let me explain. With an FPGA, the circuits are programmed. Not like software, but code sets up the circuits, and then they are pretty equivalent to having them be hard-wired. With an ASIC, they really are hard-wired. So six months later, a change to the system – be it added functionality or fixes to existing logic – will be far easier with an FPGA than an ASIC. With an FPGA, the design file is opened, the changes made and tested, then the config is compiled and delivered to manufacturing. At that point, the devices produced with the new config file will have the new functionality. With ASICs, you change the design, send it to a manufacturing shop, wait for the shop to produce a small run (working it into their schedule that is), test the result, and then do a full production run. Then the new ASIC has to be put on the assembly line to replace the old ASIC. The difference is astronomical in terms of time required and even more so in terms of cost.
Of course there are some trade-offs. Every architectural choice results in trade-offs, and anyone who tells you differently is indeed trying to sell you something, and they don’t want to admit the trade-offs used to produce what they’re selling.
One of the big concerns out there about FPGAs is that they’re less secure. In the most vague, general sense, this is true. But in practical use scenarios, it most certainly isn’t. Here are the concerns, and why they’re over-rated (note that these notes are adapted from responses to my questions put to Clint Harames of F5<’s most excellent FPGA team, I cannot vouch for other production except to say the other teams I was involved with outside of F5 were similar):
- It’s field programmable! What if it gets modified? In F5’s case, none of the programmability is accessible from the outside. There is no Ethernet or coding hack that can reprogram it, because that functionality is not accessible. Other vendors work to a differing standard, so definitely worth checking, though I would remind you that it is almost never going to be as easy to hack an FPGA as it is to hack software or COTS hardware.
- Okay, but can’t it be erased and destroy the device? In theory yes (though erasing it is only effective until the next boot – non-destructive, so-to-speak), but if “modify” functionality is not accessible, then it can’t be erased easily. The caveat is that there is of course a reset pin on the chip, but if the ne’er-do-well has physical access to your device, time to disassemble the device, and a handy pinout for the FPGA chip you’re using, I’m going to guess you have bigger problems than whether they can reset your FPGA.
- If it’s programmable, can’t the program be read out and modified? Again, that functionality can be enabled on the chip, and you can check with your device manufacturer to see if they leave it enabled for production devices. Remember, it is a twofold story here, in F5’s case, we don’t generally want to reprogram production devices and don’t want to make reverse engineering our product any easier than it has to be, while we want to protect you from someone modifying a production device. So when the design is done and meets all test criteria, we at F5 turn access to this functionality off completely before shipping product is produced. Definitely worth checking with your vendor to find out what they are doing.
Again, your vendor may do things differently, if, for some reason they need the ability to reprogram the FPGA in your device.
For you, the IT staffer, the benefits are pretty straight-forward. The device you purchase will be closer to “up to date” because of the time-to-market benefits of FPGAs, it will be cheaper because of the reduced up-front costs (note that like everything involving costs, economies of scale can change the “cheaper” part to be untrue, depending upon the costs involved), and the resulting device will be far, far faster than the equivalent processing done on a general purpose CPU. In the end, it is hardware doing the processing, and FPGAs have concurrency that general purpose CPUs can only match with a huge number of cores, even then since the OS handles the scheduling on a general purpose CPU, many cores does not normally make up the performance difference.
There are some who think the advent of virtualization and virtualized appliances should curb the use of FPGAs, as the virtual version has to include all the functionality. While this is, on the surface, a reasonable argument, it has a flaw. FPGAs are MUCH faster than software will ever be, let alone a VM running on a host with who-knows-how-many other VMs sharing its resources. So in cases like F5, where there is a hardware and a software version, the key is to be able to run in both. TMOS, F5’s OS for traffic management, uses hardware if available, software if not. This offers the best of both worlds – acceptable traffic management in a VM, and high-performance traffic management in hardware.
Next time I’ll delve into specific functionality that on our hardware platforms is implemented in FPGA, and how that helps you do your job in IT, today was more of a “what are the risks, what are the benefits” in a generic sense.
SYS-CON Events announced today that SoftNet Solutions will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. SoftNet Solutions specializes in Enterprise Solutions for Hadoop and Big Data. It offers customers the most open, robust, and value-conscious portfolio of solutions, services, and tools for the shortest route to success with Big Data. The unique differentiator is the ability to architect and ...
Oct. 22, 2016 06:45 PM EDT Reads: 607
"Matrix is an ambitious open standard and implementation that's set up to break down the fragmentation problems that exist in IP messaging and VoIP communication," explained John Woolf, Technical Evangelist at Matrix, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
Oct. 22, 2016 06:00 PM EDT Reads: 8,955
In past @ThingsExpo presentations, Joseph di Paolantonio has explored how various Internet of Things (IoT) and data management and analytics (DMA) solution spaces will come together as sensor analytics ecosystems. This year, in his session at @ThingsExpo, Joseph di Paolantonio from DataArchon, will be adding the numerous Transportation areas, from autonomous vehicles to “Uber for containers.” While IoT data in any one area of Transportation will have a huge impact in that area, combining sensor...
Oct. 22, 2016 05:30 PM EDT Reads: 478
Established in 1998, Calsoft is a leading software product engineering Services Company specializing in Storage, Networking, Virtualization and Cloud business verticals. Calsoft provides End-to-End Product Development, Quality Assurance Sustenance, Solution Engineering and Professional Services expertise to assist customers in achieving their product development and business goals. The company's deep domain knowledge of Storage, Virtualization, Networking and Cloud verticals helps in delivering ...
Oct. 22, 2016 05:30 PM EDT Reads: 966
In his general session at 18th Cloud Expo, Lee Atchison, Principal Cloud Architect and Advocate at New Relic, discussed cloud as a ‘better data center’ and how it adds new capacity (faster) and improves application availability (redundancy). The cloud is a ‘Dynamic Tool for Dynamic Apps’ and resource allocation is an integral part of your application architecture, so use only the resources you need and allocate /de-allocate resources on the fly.
Oct. 22, 2016 04:00 PM EDT Reads: 3,654
SYS-CON Events announced today that 910Telecom will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Housed in the classic Denver Gas & Electric Building, 910 15th St., 910Telecom is a carrier-neutral telecom hotel located in the heart of Denver. Adjacent to CenturyLink, AT&T, and Denver Main, 910Telecom offers connectivity to all major carriers, Internet service providers, Internet backbones and ...
Oct. 22, 2016 04:00 PM EDT Reads: 3,582
In the next five to ten years, millions, if not billions of things will become smarter. This smartness goes beyond connected things in our homes like the fridge, thermostat and fancy lighting, and into heavily regulated industries including aerospace, pharmaceutical/medical devices and energy. “Smartness” will embed itself within individual products that are part of our daily lives. We will engage with smart products - learning from them, informing them, and communicating with them. Smart produc...
Oct. 22, 2016 03:45 PM EDT Reads: 1,441
More and more brands have jumped on the IoT bandwagon. We have an excess of wearables – activity trackers, smartwatches, smart glasses and sneakers, and more that track seemingly endless datapoints. However, most consumers have no idea what “IoT” means. Creating more wearables that track data shouldn't be the aim of brands; delivering meaningful, tangible relevance to their users should be. We're in a period in which the IoT pendulum is still swinging. Initially, it swung toward "smart for smar...
Oct. 22, 2016 03:45 PM EDT Reads: 648
In his keynote at 19th Cloud Expo, Sheng Liang, co-founder and CEO of Rancher Labs, will discuss the technological advances and new business opportunities created by the rapid adoption of containers. With the success of Amazon Web Services (AWS) and various open source technologies used to build private clouds, cloud computing has become an essential component of IT strategy. However, users continue to face challenges in implementing clouds, as older technologies evolve and newer ones like Docke...
Oct. 22, 2016 03:30 PM EDT Reads: 2,244
WebRTC sits at the intersection between VoIP and the Web. As such, it poses some interesting challenges for those developing services on top of it, but also for those who need to test and monitor these services. In his session at WebRTC Summit, Tsahi Levent-Levi, co-founder of testRTC, reviewed the various challenges posed by WebRTC when it comes to testing and monitoring and on ways to overcome them.
Oct. 22, 2016 03:00 PM EDT Reads: 3,893
In his keynote at 18th Cloud Expo, Andrew Keys, Co-Founder of ConsenSys Enterprise, provided an overview of the evolution of the Internet and the Database and the future of their combination – the Blockchain. Andrew Keys is Co-Founder of ConsenSys Enterprise. He comes to ConsenSys Enterprise with capital markets, technology and entrepreneurial experience. Previously, he worked for UBS investment bank in equities analysis. Later, he was responsible for the creation and distribution of life sett...
Oct. 22, 2016 02:30 PM EDT Reads: 5,230
SYS-CON Events announced today that Coalfire will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Coalfire is the trusted leader in cybersecurity risk management and compliance services. Coalfire integrates advisory and technical assessments and recommendations to the corporate directors, executives, boards, and IT organizations for global brands and organizations in the technology, cloud, health...
Oct. 22, 2016 02:15 PM EDT Reads: 1,496
@ThingsExpo has been named the Top 5 Most Influential M2M Brand by Onalytica in the ‘Machine to Machine: Top 100 Influencers and Brands.' Onalytica analyzed the online debate on M2M by looking at over 85,000 tweets to provide the most influential individuals and brands that drive the discussion. According to Onalytica the "analysis showed a very engaged community with a lot of interactive tweets. The M2M discussion seems to be more fragmented and driven by some of the major brands present in the...
Oct. 22, 2016 01:45 PM EDT Reads: 11,268
The Internet of Things (IoT), in all its myriad manifestations, has great potential. Much of that potential comes from the evolving data management and analytic (DMA) technologies and processes that allow us to gain insight from all of the IoT data that can be generated and gathered. This potential may never be met as those data sets are tied to specific industry verticals and single markets, with no clear way to use IoT data and sensor analytics to fulfill the hype being given the IoT today.
Oct. 22, 2016 12:45 PM EDT Reads: 2,335
SYS-CON Events announced today that Transparent Cloud Computing (T-Cloud) Consortium will exhibit at the 19th International Cloud Expo®, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. The Transparent Cloud Computing Consortium (T-Cloud Consortium) will conduct research activities into changes in the computing model as a result of collaboration between "device" and "cloud" and the creation of new value and markets through organic data proces...
Oct. 22, 2016 12:45 PM EDT Reads: 1,271
SYS-CON Events announced today that MathFreeOn will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. MathFreeOn is Software as a Service (SaaS) used in Engineering and Math education. Write scripts and solve math problems online. MathFreeOn provides online courses for beginners or amateurs who have difficulties in writing scripts. In accordance with various mathematical topics, there are more tha...
Oct. 22, 2016 12:30 PM EDT Reads: 924
@ThingsExpo has been named the Top 5 Most Influential Internet of Things Brand by Onalytica in the ‘The Internet of Things Landscape 2015: Top 100 Individuals and Brands.' Onalytica analyzed Twitter conversations around the #IoT debate to uncover the most influential brands and individuals driving the conversation. Onalytica captured data from 56,224 users. The PageRank based methodology they use to extract influencers on a particular topic (tweets mentioning #InternetofThings or #IoT in this ...
Oct. 22, 2016 11:00 AM EDT Reads: 8,278
SYS-CON Events announced today that Niagara Networks will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Niagara Networks offers the highest port-density systems, and the most complete Next-Generation Network Visibility systems including Network Packet Brokers, Bypass Switches, and Network TAPs.
Oct. 22, 2016 09:30 AM EDT Reads: 1,282
In an era of historic innovation fueled by unprecedented access to data and technology, the low cost and risk of entering new markets has leveled the playing field for business. Today, any ambitious innovator can easily introduce a new application or product that can reinvent business models and transform the client experience. In their Day 2 Keynote at 19th Cloud Expo, Mercer Rowe, IBM Vice President of Strategic Alliances, and Raejeanne Skillern, Intel Vice President of Data Center Group and ...
Oct. 22, 2016 09:15 AM EDT Reads: 1,426
SYS-CON Events announced today that Embotics, the cloud automation company, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Embotics is the cloud automation company for IT organizations and service providers that need to improve provisioning or enable self-service capabilities. With a relentless focus on delivering a premier user experience and unmatched customer support, Embotics is the fas...
Oct. 22, 2016 09:15 AM EDT Reads: 751